service@pcbbee.com+86-755-29786735
My PCBbee

Get started now

Sign In Join Free

PCB Instant Quote

Dimensions:
X mm
Quantity:
Layers:
Thickness:
FR4 PCB Production Capability

Item

  • Layers
  • Material
  • Max size
  • outline tolerance
  • board thickness
  • PCB thickness tolerance( t≥1.0mm)
  • PCB Thickness Tolerance( t≤1.0mm)
  • Min Trace Width
  • Min Trace Distance
  • Finished Outer Layer Copper Thickness
  • Finished Inner Layer Copper Thicknss
  • Drill Size( Machine Drill)
  • Via Annular Ring
  • Finished TH Size( Machine Drill)
  • Hole Tolerance (Machine Drill)
  • Type of Solder Resist
  • Minimum Silkscreen Character Width
  • Minimum Silkscreen Character Length
  • Character Width to Height Ratio
  • Distance From Trace to Outline
  • Panelization With No-Gap
  • Panelization With Gap
  • Polygon Pour With Pads
  • Slot Drawing With Pads
  • Protel/dxp Opening Layer
  • Protel/dxp Outline Layer
  • Min. Half Hole Diameter in Half Hole Technique

Capability

  • 1-8 Layers
  • FR-4
  • 500x1100mm
  • ±0.2mm
  • 0.6--2.0mm
  • ± 10%
  • ±0.1mm
  • 4mil(0.1mm)
  • 4mil(0.1mm)
  • 35um/70um(1OZ/2OZ)
  • 18um/35um/70um(0.5OZ/1OZ/2OZ)
  • 0.2--6.3mm
  • ≥0.153mm(6mil)
  • 0.2--6.20mm
  • ±0.08mm
  • LPI
  • ≥0.15mm
  • ≥0.8mm
  • 1:6
  • ≥0.3mm(12mil)
  • 0
  • 1.6mm
  • Hatch
  • Use Drill Drawing Layer
  • Solder layer
  • Keepout layer or machanical layer
  • 0.6mm

Details

  • 1Layer, 2Layers, 4Layers, 6Layers, 8Layers
  • FR-4 KB6160A TG130
  • Normal size within 500x500mm
  • CNC tolerance ±0.2mm, V-cut board outline tolerance±0.5mm
  • 0.6/0.8/1.0/1.2/1.6/2.0mm
  • Note: Due to the production reason(immersion copper,surface treatment,soldermask will increase the thickness), the tolerance usually +
  • Note: Due to the production reason(immersion copper,surface treatment,soldermask will increase the thickness), the tolerance usually +
  • 4mil trace width possible, but pls try to >6mil, as the cost will higher if it is 6mil.
  • 4mil trace width possible, but pls try to >6mil, as the cost will higher if it is 6mil.
  • The finished PCB's outer layer copper thickness,1OZ=35um,2OZ=70um
  • The finished PCB's inner layer copper thickness,0.5OZ=18um,1OZ=35um,2OZ=70um
  • 0.2mm is the minmum drill size, 6.3mm is the maxmum drill size the machine can drill. Tolerance is ±0.075mm. Any holes larger than 6.3mm will charge extra fee.
  • Annular ring surrounded by traces should be no less than 0.153mm
  • Size of Finished hole is usually smaller than size in drill file because it has copper attahced.
  • Hole tolerance is ±0.08mm,for a designed 0.6mm hole, finished hole size between 0.52--0.68mm is acceptable.
  • Liquid Photo Imageable Solder Mask,colors:green,blue,yellow,red,black,white
  • Other wise it will be not clear for visual
  • Other wise it will be not clear for visual
  • Best width to height ratio for silkscreen printing.
  • For routing,distance from trace to outline should ≥0.3mm; For V-cut this distance should be ≥0.4mm
  • For V-cut panelization, set the gap between boards to be 0.
  • For routing panelazation, make sure the space between boards ≥1.6mm otherwise it will be difficult for routing.
  • We use Hatch for copper pouring,Customer who use Pads to design PCB please notice.
  • For None plated Slot,please draw it in Drill Drawing Layer
  • Some customer put opening layer into paste layer, we do not proceed with paste layer.Do not mistake the Paste Layer as Solder Layer.
  • Please note:There should be only 1 outline layer in 1 file, Please choose 1 from Keepout and machanical when drawing the outline.
  • Half hole is a special technology, Min.size for half hole diameter should be ≥ 0.6mm