Sign In
Join Free
PCB Instant Quote
FR4 PCB Production Capability
Item
- Layers
- Material
- Max size
- outline tolerance
- board thickness
- PCB thickness tolerance( t≥1.0mm)
- PCB Thickness Tolerance( t≤1.0mm)
- Min Trace Width
- Min Trace Distance
- Finished Outer Layer Copper Thickness
- Finished Inner Layer Copper Thicknss
- Drill Size( Machine Drill)
- Via Annular Ring
- Finished TH Size( Machine Drill)
- Hole Tolerance (Machine Drill)
- Type of Solder Resist
- Minimum Silkscreen Character Width
- Minimum Silkscreen Character Length
- Character Width to Height Ratio
- Distance From Trace to Outline
- Panelization With No-Gap
- Panelization With Gap
- Polygon Pour With Pads
- Slot Drawing With Pads
- Protel/dxp Opening Layer
- Protel/dxp Outline Layer
- Min. Half Hole Diameter in Half Hole Technique
Capability
- 1-8 Layers
- FR-4
- 500x1100mm
- ±0.2mm
- 0.6--2.0mm
- ± 10%
- ±0.1mm
- 4mil（0.1mm）
- 4mil（0.1mm）
- 35um/70um(1OZ/2OZ)
- 18um/35um/70um(0.5OZ/1OZ/2OZ)
- 0.2--6.3mm
- ≥0.153mm（6mil）
- 0.2--6.20mm
- ±0.08mm
- LPI
- ≥0.15mm
- ≥0.8mm
- 1:6
- ≥0.3mm（12mil）
- 0
- 1.6mm
- Hatch
- Use Drill Drawing Layer
- Solder layer
- Keepout layer or machanical layer
- 0.6mm
Details
- 1Layer, 2Layers, 4Layers, 6Layers, 8Layers
- FR-4 KB6160A TG130
- Normal size within 500x500mm
- CNC tolerance ±0.2mm, V-cut board outline tolerance±0.5mm
- 0.6/0.8/1.0/1.2/1.6/2.0mm
- Note: Due to the production reason(immersion copper,surface treatment,soldermask will increase the thickness), the tolerance usually +
- Note: Due to the production reason(immersion copper,surface treatment,soldermask will increase the thickness), the tolerance usually +
- 4mil trace width possible, but pls try to >6mil, as the cost will higher if it is 6mil.
- 4mil trace width possible, but pls try to >6mil, as the cost will higher if it is 6mil.
- The finished PCB's outer layer copper thickness,1OZ＝35um,2OZ=70um
- The finished PCB's inner layer copper thickness,0.5OZ=18um,1OZ＝35um,2OZ=70um
- 0.2mm is the minmum drill size, 6.3mm is the maxmum drill size the machine can drill. Tolerance is ±0.075mm. Any holes larger than 6.3mm will charge extra fee.
- Annular ring surrounded by traces should be no less than 0.153mm
- Size of Finished hole is usually smaller than size in drill file because it has copper attahced.
- Hole tolerance is ±0.08mm,for a designed 0.6mm hole, finished hole size between 0.52--0.68mm is acceptable.
- Liquid Photo Imageable Solder Mask,colors:green,blue,yellow,red,black,white
- Other wise it will be not clear for visual
- Other wise it will be not clear for visual
- Best width to height ratio for silkscreen printing.
- For routing,distance from trace to outline should ≥0.3mm; For V-cut this distance should be ≥0.4mm
- For V-cut panelization, set the gap between boards to be 0.
- For routing panelazation, make sure the space between boards ≥1.6mm otherwise it will be difficult for routing.
- We use Hatch for copper pouring，Customer who use Pads to design PCB please notice.
- For None plated Slot，please draw it in Drill Drawing Layer
- Some customer put opening layer into paste layer, we do not proceed with paste layer.Do not mistake the Paste Layer as Solder Layer.
- Please note:There should be only 1 outline layer in 1 file, Please choose 1 from Keepout and machanical when drawing the outline.
- Half hole is a special technology, Min.size for half hole diameter should be ≥ 0.6mm
